
WAN IP Interface Context
Wi² Controller CLI Reference Guide 97
2.10 WAN IP Interface Context
Context path: View > Enable > Config > WAN IP interface
This context provides commands for configuring various IP-networking related
settings.
pppoe client user
Supported on: Wi ²-CTRL-10 Wi ²-CTRL-40 Wi ²-CTRL-200
pppoe client user <username> <password>
Sets the PPPoE username and password.
no pppoe client user
Deletes the PPPoE username.
Parameters
<username> The username assigned to you by your ISP. The
Controller will use this username to log on to your ISP
when establishing a PPPoE connection.
<password> The password assigned to you by your ISP. The
Controller will use this username to log on to your ISP
when establishing a PPPoE connection.
ip address mode
Supported on: Wi ²-CTRL-10 Wi ²-CTRL-40 Wi ²-CTRL-200
ip address mode (dhcp | pppoe | static | none)
Sets the IP addressing mode for Internet .
Parameters
dhcp Dynamic host configuration protocol. The DHCP server
will automatically assign an address to the Controller,
which functions as a DHCP client.
pppoe Point-to-point protocol over Ethernet. The PPPoE
server will automatically assign an IP address to the
Controller. You need to supply a username and
password so the Controller can log on.
static This option enables you to manually assign an IP
address to the Controller.
none No IP address.
ip address
Supported on: Wi ²-CTRL-10 Wi ²-CTRL-40 Wi ²-CTRL-200
ip address <ip address>/<mask>
Sets a static IP address for the port.
Parameters
<address> IP address.
Komentáře k této Příručce